0
Project Information
▼
1
Pool Dimensions & Site
▼Pool shell perimeter only (exclude spa if external)
Internal: spa carved into pool shell with dam wall. External: separate spa vessel.
Total interior perimeter of the spa — used for interior finish & rebar
Length of the wall separating spa from pool — tile will be calculated for dam wall face
Height of the dam wall (for tile sqft calculation)
Outer perimeter of the spa — added to coping calculation
Open: coping removed along spillover edge. Covered: coping stays but tile is still needed underneath.
Linear feet of the spillover edge
Auto-calculated: spillover length × 1 ft (12" wall thickness)
Height of the raised spa above grade
Length of the spa side that touches/faces the pool (no veneer on this side)
Auto-calculated: (spa perimeter − shared side) × raised height
Distance from equipment pad to nearest pool plumbing connection
Length of the pool side facing away from the house (where lights go)
2
Features & Options
▼Water Feature(s)
Sheer descents, scuppers, deck jets — adds feature pump + plumbing
Salt Chlorinator
Requires automation/control board (not just timer)
Automation / Control System
IntelliCenter or similar — auto-enabled if salt chlorinator selected
In-Floor Cleaning System
IFCS hardware kit + in-floor labor
Automatic Cover
Cover Care or similar automatic pool cover
Length of the cover vault (creates dam wall for waterline tile)
Width/depth of the vault housing
How the vault opening is covered — adds lid cost + coping around vault
Raised Planter Bed
Veneer planter — uses veneer $/sqft rates
Total square footage of veneer on planter faces
Integrated Boulder Package
Natural boulder placement around pool
3
Equipment Override
▼Enter Heritage Plus quote total to override auto-calc from unit costs
Auto: 1 per spa + 1 per water feature. Override if build needs more.
Target Margin
30%
10%30%50%
Billing
$0
My Cost
$0
Margin $
$0
Cost Breakdown
ItemMy CostBill Rate
TOTALS
$0
$0
at 30% margin